Filter
Top Products
XEROX COAX/TWINAX OPTION
High Capacity Feeder orientation:
This menu option lets you define the default page orientation for
the high capacity feeder orientation.
HCF TRAY ORIENT
COR* (COR, PORTRAIT, or LANDSCAPE)
Note: This option is not available when the 4045 model 20
printer emulation is selected.
DSC Configuration
The DSC menu options allow you to configure your printer for
DSC operation.
Note: For more details of the DSC configuration options, refer
to “DSC-DSE options” section in the “Special Features” chapter
of the Xerox Coax/Twinax (XCTO) Reference Manual.
Form Feed before local copy:
This menu option determines the print position before an
Operator Initiated Local Copy (print screen function). If this
option is disabled, no Form Feed occurs. If this option is
enabled, the printer performs an automatic Form Feed (unless a
Form Feed was the last command). The new print position is
position 1 of the first line on the next page.
FF BEFORE LOCAL COPY
DISABLED* (DISABLED or ENABLED)
Form Feed after local copy:
This menu option determines the print position after an Operator
Initiated Local Copy (print screen function). If this option is
enabled, the printer performs an automatic Form Feed unless a
Form Feed was the last command. The new print position is
position 1 of the first line on the next page. If this option is
disabled, the printer defaults to Form Feed at the end of the
print buffer setting.
FF AFTER LOCAL COPY
ENABLED* (ENABLED or DISABLED)
Note: It is recommended that this option remains enabled for
the 4045 model 20 emulation.
A3-34 XEROX 4213 LASER PRINTER USER GUIDE