CARE AND MAINTENANCE
Remove any jammed paper in the machine by following these
steps:
1. Lift the access handle to lower the left cover.
Note: Be careful when removing the paper from this area
because loose toner can contaminate the fusser. If this happens,
spots will appear on subsequent prints.
2. Grasp the handle of the re-feed baffle and raise it.
3. Remove any paper jammed in the printer by gently pulling it
out from the side.
WARNING: Do not touch the high temperature areas in the exit
area. If paper is caught or wrapped around the heat roller, do
not try to remove it. Call for service.
XEROX 4213 LASER PRINTER USER GUIDE 5-39