Filter
Top Products
WX Switch Configuration Objects 159
System, cont. VLANs Groups of physical ports configured as a
distinct Layer 2 broadcast domain. Each VLAN
has its own Spanning Tree Protocol (STP) and
Internet Group Management Protocol (IGMP)
settings. Optionally, a VLAN can be associated
with an IP interface.
(See “Viewing and Configuring VLANs” on
page 206.)
ACLs Access Control Lists (ACLs) to filter traffic
(See “Viewing and Configuring ACLs” on
page 220.)
QoS Mappings between Differentiated Services
Code Point (DSCP) values and internal Class of
Service (CoS) values
(See “Viewing and Changing CoS Mappings”
on page 231.)
Wireless Wireless
Services
Settings for SSIDs to provide network services.
Wizards are provided for configuring the
following types of services: 802.1X, voice, Web
Portal, open access, and custom.
(See “Viewing and Configuring Wireless
Services” on page 235.)
Radio Profiles Sets of radio parameters that can be applied to
multiple radios, including the beacon interval,
RF Auto-Tuning settings, and service profiles
(See “Viewing and Configuring Radio Profiles”
on page 263.)
Auto-DAP Settings for the Auto-DAP profile
(See “Viewing and Changing the Auto-DAP
Profile” on page 269.)
Access Points Settings for MAPs
(See “Viewing and Configuring MAPs” on
page 272.)
Radios Settings for individual MAP radios
(See “Viewing and Changing Radio Settings”
on page 281.)
Table 16 WX Switch Object Types (continued)
Category Object Type Description