Filter
Top Products
238 CHAPTER 7: CONFIGURING WIRELESS PARAMETERS
You don’t need to select the values for all these parameters when you
configure a service. The Service Profile wizards help you configure the
essential parameters and assign appropriate values to the rest. Some of
the parameters that 3WXM automatically sets are not configurable using
the Service Profile wizards. To view all settings (except access rules) or
change settings, select the service profile and click Properties.
Access Rules
The service profile wizards automatically create network access rules to
control access to the SSIDs configured by the wizards. The access rules
match on all usernames (or MAC addresses for voice service profiles).
Table 19 lists the access rules automatically created by the service profile
wizards.
The ** and * values are wildcards. The ** wildcard matches on all
usernames. To match on all MAC addresses (MAC access rules only), use
only a single *.
You can restrict access by specifying part of the username or MAC
address along with a wildcard *. In this case, only the usernames or MAC
addresses that match the partial username or address are allowed access.
User Globs and MAC Address Globs For a user glob, type a full or
partial username to be matched during authentication (1 to 80
alphanumeric characters, with no spaces or tabs). The format of a user
glob depends on the client type and EAP method.
Table 19 Access Rules Automatically Created by Service Profile Wizards
Service Profile Type Access Rule Type Default Access Glob
802.1X 802.1X **
Voice MAC *
Web-Portal (WebAAA) Web **
Open (no user login
required)
Last-resort last-resort-ssid-name
Custom One or more of the above,
depending on the type(s)
selected during
configuration of the service
profile.
None. No access rule is
created automatically. You
must configure the rules.