Filter
Top Products
502 CHAPTER B: CHANGING 3WXM SERVICES PREFERENCES
Low SNR specifies how low the signal-to-noise ratio (SNR) can be
for a radio without triggering a TCA. You can specify from 0 to 60
decibels (dB). The default is 20 dB.
Max clients per AP specifies the maximum number of clients that
can be associated with a MAP without triggering a TCA. You can
specify from 5 to 50 clients. The default is 30 clients.
Max Receiver Adjustment specifies the maximum amount a radio’s
hearing sensitivity can increase without triggering a TCA. You can
specify from 0 to 20 decibels (dB). The default is 6 dB.
When a TCA is triggered, the alert is displayed as a red flag in the link
view of the Explore window of the Monitor tab. You can click on the
object for more information. In addition, the corresponding data
column in the RF Trends window of the Monitor tab turns red.
7 To enable 3WXM Services to track rogue detection and countermeasures
information, select Enable Rogue Detection. This option is enabled by
default.
8 Click Save to save the changes or Cancel to cancel the changes.
9 Click another tab to configure more settings or click Close to close the
3WXM Services Setup dialog box.
Accessing the
3WXM Services Log
You can access the 3WXM Services log through a web browser. To access
the 3WXM Services log, type the following in the Address or Location
field of your browser:
https://ip-addr
The ip-addr is the IP address of the machine on which the service is
installed. The default TCP port number is 443. To access the service from
the same machine on which it is installed, use IP address 127.0.0.1 (the
loopback address).