Filter
Top Products
260 CHAPTER 7: CONFIGURING WIRELESS PARAMETERS
Modifying SSID
Encryption Settings
and Access Rules
You can create access rules for a service profile from within a service
profile wizard. You also can create or modify a service profile’s access
rules after creating the service profile.
1 Display the Wireless Service Profiles table:
a In the Organizer panel, click on the plus sign next to the WX switch on
which the service profile is configured.
1 Click on the plus sign next to Wireless.
1 Select Wireless Services.
2 Select the service profile in the table.
A set of tasks appears under Setup in the Task List panel.
3 To configure encryption settings and access rules, select one of the
following in the Task List panel and go to “Modifying Encryption
Settings”.
802.1X Access
MAC Access (used for voice)
Web Portal Access
Open Access
To configure access rules only, select Access Rules and go to “Modifying
Access Rules” on page 262.
Modifying Encryption Settings
1 Select the security modes you want the SSID to support. You can select
one or more of the following:
RSN (WPA2)
WPA
Static WEP
2 Click Next.
3 If you selected RSN or WPA, you can select whether to use dynamically
generated keys, or static keys based on a passphrase.
To use dynamically generated keys, leave the Pre-shared Key box
blank.
To use static keys, type a string from 8 to 63 characters long in the
Pre-shared Key box and click Generate.
4 Click Next.