Filter
Top Products
Modifying Basic Switch Parameters 173
6 Optionally, in the Offset Minutes box, select the number of minutes
(between -59 to 59) to subtract from or add to UTC.
7 In the DST Name box, type the name for the summertime offset (1 to 16
alphanumeric characters, with no spaces or tabs).
8 In the Start Month list, select the month of the year when the time
change starts.
9 In the Start Week list, select the week of the month when the time
change starts (First, Second, Third, Fourth, or Last).
10 In the Start Day list, select the day of the week when the time change
starts.
11 In the Start Hour box, specify the hour (between 0 and 23) to start the
time change.
12 In the Start Minute box, specify the minute (between 0 and 59) when the
time change starts.
13 In the End Month list, select the month of the year when the time change
ends.
14 In the End Week list, select the week of the month when the time change
ends (First, Second, Third, Fourth, or Last).
15 In the End Day list, select the day of the week when the time change
ends.
16 In the End Hour box, specify the hour (between 0 and 23) when the time
change ends.
17 In the End Minute box, specify the minute (between 0 and 59) when the
time change ends.
18 Click OK.
Changing System
Information
To change system information:
1 Select the Configuration tool bar option.
2 In the Organizer panel, select the WX switch.
3 In the Task List panel, select System Information.
The System Information wizard appears.
4 In the Contact box, type the contact name for the WX.
5 In the Location box, type the location of the WX.