Filter
Top Products
318 CHAPTER 8: CONFIGURING AUTHENTICATION, AUTHORIZATION, AND ACCOUNTING PARAMETERS
7 To enable this accounting rule for the SSID, select Enabled.
By default, accounting rules you configure in 3WXM are disabled, which
means 3WXM does not add the rules to the switch’s configuration.
8 Select one of the following record options:
Select Start-Stop to specify that records are sent at the start of a
session and the end of a session.
Select Stop-Only to specify that records are sent only at the end of a
session.
9 Select the accounting method(s) in the Available RADIUS Server Groups
list and click Add.
The options and processing are the same as those for authentication
methods. (See step 5.)
10 Click Finish.
Viewing and
Configuring WX
Administrator
Access Rules
MSS supports administrative access to a WX switch through the serial
console port or through the network. Connections through the network
use Telnet or SSH.
This section assumes that you are familiar with the AAA options for
administrative access. For detailed information, see the “Configuring
AAA for Administrative and Local Access” chapter of the Wireless LAN
Switch and Controller Configuration Guide.
Viewing WX
Administrator Access
Rules
To view WX administrator access rules:
1 Select the Configuration tool bar option.
2 In the Organizer panel, click the plus sign next to the WX switch.
3 Click the plus sign next to AAA.
4 Select Admin Access Rules.
The configured administrative access rules appear.