Filter
Top Products
Step 2, option A: Setting up the printer as a print server
(using PCONSOLE)
To set up your printer as a print server you must run PCONSOLE under DOS
to specify the print server (PSERVER mode) and create a print queue.
IMPORTANT
The procedures in this section are specific for a version of
PCONSOLE running under NetWare 4.02. If you are running PCONSOLE
under NetWare 4.1 or NetWare 3.x, the menus and commands will differ
somewhat.
Specifying a print server
Your first task is to start PCONSOLE and specify the Color LaserWriter
12/600 PS as the print server.
1 Log in to a file server from DOS on a client computer.
IMPORTANT
You must have supervisor or equivalent privileges to create a print
server.
2At the DOS prompt, type
PCONSOLE
and press Enter.
The utility starts.
3Press F4.
This changes PCONSOLE to bindery mode, and the Available Options menu
appears, displaying printer console options.
Print Queues
Print Servers
Quick Setup
Change Current NetWare Server
87
Setting Up the Printer for Windows and NetWare Users