Filter
Top Products
Connecting a single external hard disk
1 Turn off the printer.
2Attach the HDI-30 SCSI System cable to the SCSI port on the printer.
3Attach the other end of the HDI-30 SCSI System cable to either SCSI port on the
hard disk.
4Attach a cable terminator to the other SCSI port on the hard disk.
The printer recognizes disks formatted for use with the Macintosh
hierarchical file system (HFS) format. However, the printer will not recognize
disks using other formats, and the printer’s startup page will not indicate that
the hard disk is installed until after you initialize the disk. See “Initializing
Hard Disks,” later in this chapter, for more information.
Connecting multiple external hard disks
1 Turn off the printer and all hard disks connected to it.
2Attach the HDI-30 SCSI System cable to the SCSI port on the printer.
3Attach the other end of the cable to the SCSI port on the first hard disk.
4Attach a peripheral cable to the other SCSI port on the first hard disk.
5Attach the other end of the peripheral cable to either SCSI port on the next hard disk.
6 Repeat steps 4 and 5 for each additional hard disk.
7Attach a cable terminator to the unused SCSI port on the last hard disk.
139
Installing Options