Apple 12/600PS Printer User Manual


 
Configuring ATPS for the first time on a NetWare 4 server
If you are setting up the printer for access by Macintosh computers on a
NetWare 4 network and this is the first time you are configuring ATPS, follow
these instructions.
You can configure ATPS from the server console or by running RCONSOLE
(remote console) from a client PC.
1At the console prompt, type
load install
The Install utility starts, and a list of Installation Options appears.
2Select the Maintenance/Selective Install option and press Enter.
An additional list of options appears.
3Select Product Options from the list and press Enter.
A list of product options appears. If the Macintosh NLM is installed and
operating, a NW-MAC option will be available.
4Select the NW-MAC option and press Enter.
A list of configuration options appears.
5Select Configure Print Services and press Enter.
A list of print service configuration options appears.
6Select Quick Configuration and press Enter.
A list of lookup parameter options appears.
7Select the Printer Model entry and press Enter.
A list of printer types appears.
8Select the LaserWriter Pro 630 option and press Enter.
This selection provides a printer type similar to the Color LaserWriter
12/600 PS.
9In the lookup parameter list, change the zone name to the zone in which the printer is
currently located.
270
Appendix B