Filter
Top Products
Configuring ATPS for the first time on a NetWare 3.x server
If you are setting up the printer for access by Macintosh computers on a
NetWare 3.x network and this is the first time you are configuring ATPS,
follow these instructions.
You can configure ATPS from the server console or by running RCONSOLE
(remote console) from a client computer.
1At the console prompt, type
load install
The Install utility starts, and a list of Installation Options appears.
2Select Product Options from the list and press Enter.
A list of product options appears. If the Macintosh NLM is installed and
operating properly, a NW-MAC option will be available.
3Select the NW-MAC option and press Enter.
A list of configuration files appears.
4From the list, select the file SYS:\SYSTEM\ATPS.CFG and press Enter.
A prompt appears, asking if you want to create a new file.
5Type
y
and press Enter.
An empty window appears, providing an area in which to enter configuration
information.
272
Appendix B