Apple 12/600PS Printer User Manual


 
Changing TCP/IP configurations
You can specify the IP address of the printer. For information about
determining the printer’s IP address and setting up the printer on a TCP/IP
network, see Chapter 4.
1 Open the Communication Configuration category.
You see a list of communication settings options.
2 Open the TCP/IP category.
3In the panel that appears, make the changes you want.
m Ty pe in the printer’s IP address.
m Drag the slider control to specify the printer’s subnet mask.
m Specify the default gateway address, that is, the IP address of the default
gateway used for sending packets off the local network.
m To add to the list of hosts that have acccess to this printer, click Add and
choose Local, Individual, or Group in the dialog box that appears.
m Choose Local to allow printing from all hosts on the same subnet as the
printer.
m Choose Individual to allow printing from a particular host, and specify
the host’s address.
m Choose Group to allow printing from all hosts on a different subnet, and
indicate the group’s subnet mask.
m Click Send to send the changes to the printer.
m To remove a printer from the list of hosts that have acccess to this printer,
click Remove.
4 To send the changes to the printer, click Send.
106
Chapter 3