Apple 12/600PS Printer User Manual


 
Connecting to an Ethernet network
A single Ethernet cable can carry a number of network protocols, including
AppleTalk (sometimes called EtherTalk when it’s on an Ethernet network),
Novell NetWare, and TCP/IP. To connect the printer to an Ethernet network
running any combination of these protocols, follow these steps:
1 Obtain an Ethernet transceiver and a length of Ethernet cable appropriate for your
network’s media type—thin, AUI, or twisted pair.
Note: These Apple transceivers are self-terminating. Do not add a terminator
to the end of the network. If you’re not using Apple network devices, check
the instructions that came with the transceivers you are using.
2Plug the short cable from the transceiver into the Ethernet port (
G
) on the printer.
Apple Ethernet
thin coaxial transceiver
Apple Ethernet
AUI adapter
Apple Ethernet
twisted-pair transceiver
30
Chapter 1