Apple 12/600PS Printer User Manual


 
6Enter a line of configuration information for each Color LaserWriter 12/600 PS printer.
(Enclose the printer name and zone name in quotation marks.)
Example
“Sales Printer:Ethernet Zone”
This example identifies the printer “Sales Printer” located in the zone
“Ethernet Zone.”
You can include a
-h option at the end of the line to instruct ATPS to make
the printer unavailable for direct Macintosh printing; this makes the printer
accessible only through ATPS queues.
Example
“Sales Printer:Ethernet Zone” -h
Note: Other ATPS options are available for configuring the printer. See the
NetWare for Macintosh documentation for more information on these options.
7Press Esc to quit editing.
A prompt appears, asking if you want to save your changes.
8Type
y
and press Enter.
The list of configuration files reappears.
9Press Esc until the Install utility exits.
10 At the system console prompt, type
unload atps
and press Enter.
This command unloads the previous version of ATPS configuration. Now you
you can reload ATPS using the modified configuration.
11 At the system console prompt, type
load atps
and press Enter.
The new configuration is immediately available.
275
Setting up the Printer as an ATPS Remote Printer