Apple 12/600PS Printer User Manual


 
What to do next
The PostScript Printer Driver and other software are now installed. To learn
to use the PostScript Printer Driver, turn to “Printing From Windows
Applications,” later in this chapter.
Installing software for Windows NT
The steps to install the PostScript Printer Description (PPD) file for the Color
LaserWriter 12/600 PS (or other Apple printer) on a Windows NT system are
similar to those in the previous section, except that you select Custom Install
(step 7) and click “Windows NT Printer Software.” Make sure the other
checkboxes are deselected, then follow these steps:
1Click Install. Instructions for installing the WIndows NT software appear.
2Click Continue. The Print Manager appears.
3Select Create Printer from the Print Manager’s Printer menu. The Create Printer dialog
box appears.
4Select Other (at the bottom of the list) in the Driver Combo box.
5 Insert
Printer Disk 3 for Windows
in the floppy disk drive.
6Make sure the correct floppy disk drive is indicated in the Install Driver dialog box and
click OK. A list of printer drivers appears.
7Select the printer driver that corresponds to your printer and click OK.
8 Follow the instructions on the screen, and click Continue and OK to complete the
installation.
177
Windows and DOS Users