Filter
Top Products
13 Check the startup page to see that the new memory is listed there.
If the startup page has been turned off, use the Apple Printer Utility to print
the startup page. (For details, see “Turning the Startup Pages On or Off” in
Chapter 2 for Macintosh computers, or Chapter 3 for Windows computers.)
14 Next, configure the printer software to use the additional memory.
For configuration instructions, see “Configuring Your Software for New
Printer Options,” next.
Configuring your software for new printer options
After installing more memory or a 250-sheet feeder, the administrator or the
user needs to update the printer software on each computer connected to the
network. You can reconfigure the printer software using the Chooser on
Macintosh computers or the Windows Setup dialog box on IBM PC or
compatible computers.
Configuring the Macintosh printer software
1Choose the Chooser from the File menu.
The Chooser dialog box appears.
2Click the LaserWriter 8 icon.
3If your network has zones, click the printer’s zone to select it. If your network doesn’t
have zones, skip to step 4.
4Double-click the printer name.
The printer software automatically checks the printer’s options and selects the
correct settings.
5Close the Chooser.
150
Chapter 5