Filter
Top Products
3Type the following command to change directories:
cd /usr/spool/lpd
4 Create and set the privileges for the two spool directories specified in step 2, as shown
in this example:
Example
mkdir KeithsLW
chown daemon KeithsLW
chgrp daemon KeithsLW
chmod 775 KeithsLW
Notes on configuring specific UNIX systems
The following sections describe how to configure certain UNIX systems.
Configuring HP-UX version 8.07
1 Assign an IP address and IP name to the printer, as described in “Step 3: Assigning an
IP Address to the Printer,” earlier in this chapter.
2Make sure the printer’s IP name and IP address are entered in the
/etc/hosts
file.
3 Log in to the system console as
root.
The System Administration Manager (SAM) uses a screen-oriented interface
that works best at the console.
4Run the SAM utility by typing
sam
at the UNIX prompt.
5Select the following options, in order, from the SAM menu:
Peripheral devices
Printers and Plotters
Actions
Add a Remote Printer (Do not select “Add a Network Printer.”)
A form appears for you to define a remote printer.
121
Setting Up the Printer for UNIX Users