Filter
Top Products
1-9
SETUP & PREPARATION BEFORE USE - CHAPTER 1
Cover
White shaft
Blue shaft
Hook
6. Carefully, tighten the ribbon and put the cartridge back into the machine.
5. Place the ribbon in the cartridge and close the covers, as shown in the illustration. If the
shafts are not positioned correctly then the cover will not close.
150°
Blue shaft
White shaft
Black gear
shaft
New ribbon
4. Install the blue, white and black shafts into the cardboard cores of the new ribbon. Pay
special attention to the position of the ribbon as shown in the illustration.
Black gear shaft