Filter
Top Products
6-2
SENDING FAXES - CHAPTER 6
The Auto Document Feeder (ADF)
The Auto Document Feeder (ADF) automatically feeds documents (up to 20 pages) into
the fax machine, one at a time. The thickness and weight of the documents should fall into
the following categories:
Thickness: For one sheet: 0.07 to 0.12 mm (2.8 x 10
-3
to 4.7 x 10
-3
inches).
For multiple sheets: 0.07 to 0.10 mm (2.8 x 10
-3
to 3.9 x 10
-3
inches).
Weight: For one sheet: 52 to 85 g/m
2
(0.07 x 10
-3
to 0.121 x 10
-3
lbs/inch
2
).
For multiple sheets: 52 to 80 g/m
2
(0.07 x 10
-3
to 0.114 x 10
-3
lbs/inch
2
).
Before inserting documents into the document feeder, fan the sheets of paper to make sure
the documents are not stuck together. Then tap the leading edge on a table so that all the
pages are even when placed in the feeder. Make sure you always put the documents in face
down.
Getting Ready to Send a Fax
SETTING THE RESOLUTION
You can choose a setting (STANDARD, FINE, SUPERFINE, or PHOTO) for the resolution
any time before you press Start or Copy. You can choose a setting by pressing the Resolution
key. The current status of the setting will be displayed on the LCD or Resolution lights
when you press the Resolution key.
You can easily check the current setting of resolution by looking at the resolution lights:
means light off . means light on.
Resolution lights are available only on FAX 1030 Plus.
STANDARD The STANDARD resolution can be used for most typewritten text.
Transmission speed is normal.
When the STANDARD setting is on, both lights are off.
FINE The FINE resolution is an ideal setting to use if you want to send
documents that have small print. Transmission speed is slower
than STANDARD.
When the FINE setting is on, the FINE light will be lit.
SUPERFINE The SUPERFINE resolution is a good setting to use for documents
with very small print or artwork. Transmission speed is slower
than FINE.
When the SUPERFINE setting is on, the S. FINE light will be lit.
PHOTO The PHOTO resolution is ideal for sending documents that have
varying shades of gray, such as photographs. Transmission speed
is slower than FINE.
The PHOTO setting is on when both lights are lit.
Fine
Photo
S.Fine
Fine
Photo
S.Fine
Fine
Photo
S.Fine
Fine
Photo
S.Fine