Brother Fax-1020Plus Fax Machine User Manual


 
USING THE UNIT AS A TELEPHONE - CHAPTER 5
5-3
Tel Key (Only for FAX 1020 Plus)
This key is used to enter into a telephone conversation having picked up the handset of an
external telephone in F/T pseudo-ringing mode.
For further information, see chap. 2.
On Hook Dialling
1. Dial the number by pressing the number keys or Quick Dial keys.
2. The number you are dialling, or the name you have stored for One-Touch or Speed-dial
is displayed on the LCD.
3. Press Start. You can listen to the other end of the line from the monitor speaker.
4. Pick up the handset when you hear the other end from the monitor speaker. If you press
Tel before lifting the handset, the call will be disconnected. (Only for FAX 1020 Plus).
On FAX 1030 Plus, you can speak immediately to the party at the other end without
lifting the handset. Press Speaker Phone when you finish the conversation.
Answering Calls with the Speakerphone (Only for FAX 1030 Plus)
When the machine rings, instead of lifting the handset, press Speaker Phone. Speak
clearly, toward the microphone. To end the call, press Speaker Phone.
If you have a bad telephone line connection, the other party might hear your voice echoed
during the call. Hang up and try the call again—OR—Pick up the handset.
Tel Key
This key is used to enter into a telephone conversation once you have picked up the handset
of an external telephone during the F/T pseudo-ring. If you press the Tel key and then
replace the handset, then you will be listening through the monitor speaker,but the other
party will not be able to hear you.