Filter
Top Products
108 Chapter 5
Faxing
Sending Methods
There are four methods of sending faxes:
z Sending from your machine (Memory sending)
z Sending manually from your machine
z Sending to multiple recipients from your machine in one operation (Sequential broadcasting)
z Sending from your computer
This section describes how to use these methods.
z Sending From Your Machine (Memory Sending)
1 Prepare for faxing.
(1) Press [ON/OFF] to turn on the machine.
See “Turning on the Machine” on page 18.
(2) Load the document on the Platen Glass or the ADF.
(3) Press [FAX].
(4) Adjust fax settings as necessary.
See “Before Sending Faxes” on page 106.
2 Start faxing.
(1) Dial the recipient’s number using the Numeric buttons or speed dialing.
(2) Press [Color] for color sending, or [Black] for black & white sending.
z When the document was loaded on the Platen Glass:
(3) When the following message is displayed, load the next page on the Platen Glass.
If you have only one page of document to scan, go to step (6).
(4) Press [Color] or [Black].
(5) Repeat steps (3) and (4) to scan in all pages of the document.
(6) Press [OK].
Important
When sending a double-sided document, set the document on the Platen Glass. You
cannot scan double-sided documents from the ADF.
Note
For details on document requirements and how to load documents, see “Loading
Documents to Copy, Fax, or Scan” on page 19.
Note
For details on how to use speed dialog, see “How to Use Speed Dialing” on page 111.