Filter
Top Products
28 Chapter 1
Before Printing
2 Prepare to load paper.
(1) Open the Paper Support, then pull out the Paper Support Extension to support the paper.
(2) Press the Open Button to open the Paper Output Tray.
(3) Open the Paper Output Tray Extension completely.
(4) Press [Feed Switch] so that the Auto Sheet Feeder Lamp (A) lights.
3 Load the paper.
(1) Load the paper into the Auto Sheet Feeder with the print side facing UP.
(2) Align the paper stack against the Cover Guide on the right side of the Paper Support.
(3) Pinch the Paper Guide and slide it against the left side of the paper stack.
Note
z Align the edges of paper neatly before loading. Loading paper without aligning the edges
may cause paper jams.
z When paper is curled, hold the opposing curled corners and gently bend them in the
opposite direction until the paper becomes completely flat. See “Paper is curled.” on
page 172.
Note
You can also select the paper source with the printer driver. For details, refer to the Printer
Driver Guide.
Important
Ensure that the Cover Guide stands when you load paper in the Auto Sheet Feeder.
(2)
(1)
(3)
(4)
(A)