Filter
Top Products
6
Handling Do not attempt to disassemble or modify the machine. There are no user serviceable parts inside
the machine.
The machine contains high-voltage components. Never attempt any maintenance procedure not
described in this guide. Incorrect maintenance procedures may damage the machine, or cause a
fire or electrical shock.
Do not drop paper clips, staples, or other metal objects inside the machine. Also do not spill water,
liquid, or flammable substances inside the machine. If these items come into contact with high-
voltage parts inside the machine, it may result in fire or electrical shock. If these items are dropped
or spilled in the machine, turn OFF the power and unplug the power cord immediately with dry
hands. Then contact the Canon Customer Care Center.
Do not use flammable sprays near the machine.
This could cause a fire or electrical shock if the spray comes into contact with electrical
components inside the machine.
There are high-voltage components inside the machine. If you are looking inside the machine to
clear paper jams etc., do not allow metal objects such as jewelry to come into contact with the
inside of the machine. Contact may result in burns or electrical shock.
Others This product emits low level magnetic flux. If you use a cardiac pacemaker and feel abnormalities,
please move away from this product and consult your doctor.
When setting the machine near electric products with fluorescent lighting, separate the machine at
least 5.9 inches (15 cm) from electric products equipped with fluorescent lighting. If you place it
near to them, the machine may malfunction as a result of the noise emitted by the fluorescent
lighting.
When turning OFF the power, be sure to press [ON/OFF] and confirm that the Alarm Lamp has
shut off. If you pull the power plug out of the wall outlet while the Alarm Lamp is lit or flashing, the
Print Head is not protected, and you may not be able to print later.
Caution
You may cause injury or damage the machine if you ignore any of these safety precautions.
Location Do not block or cover the ventilation port or any openings on the machine with objects, as it may
cause the inside of machine to overheat and cause a fire.
Place the machine on a flat, stable, vibration-free surface that is strong enough to support its
weight. If the machine topples over, it may result in injury. (For the weight of the machine, see
“Appendix” on page 197.)
Do not use or store the machine outdoors.
Do not install the machine near devices that contain magnets or generate magnetic fields, such as
speakers.
To ensure proper ventilation, make sure the machine is approximately 4 inches (10 cm) away from
walls and other equipment.
Do not install the machine in a location that is very humid or dusty, in direct sunlight, outdoors, or
close to a heating source.
Installing in such a location may result in fire or electrical shock.
To avoid the risk of fire or electrical shocks, install the machine in a location with an ambient
temperature range of 41°F to 95°F (5°C to 35°C) and humidity of 10% to 90% (condensation free).
Do not place the machine on a thick rug or carpet.
If fibers or dust come inside the machine, it could cause a fire.