Filter
Top Products
Chapter 1 17
Before Printing
(14)Auto Sheet Feeder Lamp
Lit when the Auto Sheet Feeder is selected.
(15)Cassette Lamp
Lit when the Cassette is selected.
(16)[Feed Switch]
Selects the paper source. Press this toggle switch to change the paper source between
the Auto Sheet Feeder and Cassette.
(17)[Photo Index Sheet]
Switches to Photo Index Sheet mode. See “Printing by Using the Photo Index Sheet” on
page 66.
(18)[Enlarge/Reduce]
Sets the enlargement or reduction ratio for copying.
(19)[Search]
Looks up target photos in the memory card using the shooting date as the search key.
See “Searching for Photos with the Shooting Date (Search)” on page 59.
(20)[Two-Sided]
Specifies settings for <Two-sided copy>.
(21)[FAX Quality]
Sets the resolution of the fax you are sending.
(22)[Back]
Allows you to return to the previous screen.
(23)[OK]
Finalizes your selection for the menu or setting item.
Restores the machine to normal operation after a printing error was resolved, or if paper
jams are cleared. Ejects documents remaining in the ADF.
(24)[] [] [ ] [ ]
Scroll through menu selections, and increase or decrease the number of copies. You can
use these buttons when < >, < >, < >, and < > are displayed on the LCD. Also
[ ] cancels the entered character, and [ ] enters a space between characters when
entering characters.
(25)[Trimming]
Use to crop the photo that is displayed. See “Printing a Specified Area (Trimming)” on
page 60.
(26)[Tone]
Switches temporarily to tone dialing. Also changes the mode when entering characters.
(27)[Redial/Pause]
Redials the last dialed number using Numeric buttons. Also enters pauses between or
after numbers when dialing or registering numbers.
(28)[Coded Dial]
Press this button and a two-digit code to dial a pre-registered fax/telephone number or
group.
(29)[Hook]
Engages or disengages the telephone line.
(30)[Black]
Starts black & white copying, scanning, or faxing.
(31)[Color]
Starts color copying, photo printing, scanning, or faxing.