Filter
Top Products
4-40 SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
4.7.1.1 When Three External I/O Expansion Units Mounted
This section provides an example of the cable routing procedure applied when three external
I/O expansion units are mounted in the rack space for the M8000 server.
Cable Routing Procedure
The cable routing procedure explained below is an example of the recommended procedure.
This section explains the recommended cable routing procedure in an example using a
configuration in which three external I/O expansion units are mounted and 34 LAN cables
are connected to each external I/O expansion unit.
When actually routing cables, perform the work properly with reference to this procedure
while following the precautions for cable routing.
Hook-and-loop Fasteners Used
This procedure specifies only the short and long hook-and-loop fasteners recommended for
use. During actual cable routing, use the type of hook-and-loop fastener appropriate for the
number of cables to be bound.
1. Run 72 LAN cables (of the cables connected to the external I/O expansion units)
along the right route.