Filter
Top Products
6-28 SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
3. Slide the CPU Module upward at an inclined angle to remove it from the guide lock.
Caution – Hold the CPU module with both hands. If you hold it with your either hand by
necessity, take care not to drop it. Otherwise, the CPU module might be damaged. To hold
the heat sink with one hand, hold the short sides as shown by the arrows in the figure.
FIGURE 6-18 Handling of CPU Module (2)
FIGURE 6-19 Removing the CPU Module
4. Remove the CPU Module insertion/extraction tool.