Filter
Top Products
6-10 SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
FIGURE 6-6 Removing the CMU (Rear of the M9000 Base Cabinet)
8. Place the removed CMU with the cover and its label facing upward on an antistatic
mat.
9. Remove the cover of the CMU.
a. Pull the two latches on the connector side of the CMU to unlock the latches.
b. Slide the cover of the CMU toward the connector side to release it from the guide
pins (two pins on each side).
c. Raise the cover of the CMU to remove it.
10. Remove the DIMM duct cover. (See
FIGURE 6-7)
1
1
2
3