Filter
Top Products
1-1
CHAPTER
1
Safety and Tools
This chapter provides notes on handling the SPARC Enterprise M8000/M9000 servers, and
describes the required tools for maintenance.
This information is explained in the following sections:
■ Section 1.1, “Conventions for Alert Messages” on page 1-1
■ Section 1.2, “Notes on Safety” on page 1-2
■ Section 1.3, “Tools Required for Maintenance” on page 1-8
■ Section 1.4, “Antistatic Precautions” on page 1-9
1.1 Conventions for Alert Messages
This manual uses the following conventions to show alert messages, which are intended to
prevent injury to the user or bystanders as well as property damage, and important messages
that are useful to the user.
Caution – The WARNING signal indicates a hazardous situation that could result in death
or serious personal injury (potential hazard) if the user does not perform the procedure
correctly.
Caution – The CAUTION signal indicates a hazardous situation that could result in minor
or moderate personal injury if the user does not perform the procedure correctly. This signal
also indicates that damage to the product or other property may occur if the user does not
perform the procedure correctly.