Filter
Top Products
B-22 SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
Note – Prevent media removal is a command to prohibit the tape ejection, which disables
the operation of eject button. When the tape recording or replay operation exceeded 50 hours
since the previous cleaning tape insertion, the Clean LED turns on to inform the user of the
cleaning request. In this case, insert the cleaning tape to perform the head cleaning.
TABLE B-2 Status Display of LEDs for DAT72-compliant Tape Drive Unit (TAPEU)
Status of DAT72-compliant TAPEU Status display of LEDs
Clean LED Tape LED Drive LED
Power-on status (before tape insertion) — Off Off
During tape loading — Lit Lit
Tape idling — Lit Off
During read / write / SCSI operation — Lit Lit
Cleaning request (during operation) Lit Lit Lit
C1 warning (during operation) Slow blinking Lit Lit
Media error occurred — Fast blinking Off
Hardware error occurred — Lit Fast blinking
Cleaning tape terminated (end of tape) Fast blinking Fast blinking —
Prevent media removal is in effect — Lit Lit