Filter
Top Products
4-50 SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
2. Bind the cables from the external I/O expansion unit with a short hook-and-loop
fastener while taking care not to touch the main line switch of the ACS. (See (1) in
FIGURE 4-18)
3. Fasten the cables with a short hook-and-loop fastener to the cable holder at location
(2) shown in
FIGURE 4-18.
FIGURE 4-18 Magnified View of Part A (M8000, Rear View)
4. Fasten the cables with a short hook-and-loop fastener to the cable holder at location
(3) shown in
FIGURE 4-19.
5. Also bind the cables with a short hook-and-loop fastener at a location near the floor
panel. (See (4) in
FIGURE 4-19)
Binding the cables near the floor panel facilitates cable handling through floor panel
openings.