Filter
Top Products
Chapter 4 FRU Replacement Preparation 4-45
10. Divide the remaining cables into three routes (about 12 cables per route), bind the
cables on each route with a short hook-and-loop fastener, and allow them to hang
from the fastener. (See (8) in
FIGURE 4-14)
Caution – Adjust the positioning of the routes appropriately so that the cables do not cover
a PCI cassette at the front of an IOU.
FIGURE 4-14 Magnified View of Part B (M8000, Rear View)
11. Fasten the cables running along the left route to the cable holder with a short
hook-and-loop fastener. (See (9) in
FIGURE 4-15)
12. Bind each remaining bundle of hanging cables with a short hook-and-loop fastener.
(See (10) in
FIGURE 4-15)