Filter
Top Products
17-6 SPARC Enterprise M8000/M9000 Servers Service Manual • October 2012
e. While grasping the eject/lock levers, pull out the XBU slowly from the slot.
Caution – Do not hang or yank the cable. Especially do not while the one side is
connected.
Caution – Tighten or remove the cable screws evenly on both sides.
FIGURE 17-3 Removing the XBU (Front of the M9000 Base Cabinet)
9. Place the removed crossbar unit on an antistatic mat, and then install the
replacement crossbar unit.
2
1
1