Filter
Top Products
Setting the ScanSnap (for Mac OS users)
181
Setting the ScanSnap
This section explains how to change and save scan settings, automatic linkage with applica-
tions, and windows displayed during scanning.
■ Changing the Scan Settings
Use the ScanSnap Manager menu to change scan settings for ScanSnap.
The following explains how to change the settings.
1. Select [Settings] from the ScanSnap Manager menu.
Refer to "ScanSnap Manager Menu" (page 170) for more information about the
ScanSnap Manager menu.
D The ScanSnap setup window appears.
2. Click the [Detail] button to switch to the detail view mode.
3. Change the scan settings in each tab in the ScanSnap setup window.
The following items can be changed in each tab:
For details, refer to the ScanSnap Manager Help.
You can also open the ScanSnap setup window by pressing simultaneously the
[command ( )] and [S] keys on the keyboard. This operation is only enabled when
ScanSnap Manager is active (when "ScanSnap Manager" is displayed in the top menu).
The ScanSnap setup window retains the display status from the last time the ScanSnap
was used. For example, if it was closed in detail view mode, the window is displayed in
detail mode the next time you open it.
Outline view
Detail view