Filter
Top Products
Turning the ScanSnap ON/OFF
25
Turning the ScanSnap ON/OFF
This section explains how to turn the ScanSnap ON/OFF.
The ScanSnap is turned ON/OFF in conjunction with the computer. Therefore, you do not
have to worry about turning the power ON/OFF as long as the ScanSnap is connected to a
computer.
zTurning the ScanSnap on
Open the ADF paper chute (cover) when the computer is turned on.
D The [Scan] button lights in blue, indicating that the ScanSnap is turned on.
zTurning the ScanSnap off
Turn off the computer or close the ADF paper chute (cover).
zScanSnap sleep mode
When the ScanSnap has not been in operation for one minute while the power is on, it
enters sleep (power saving) mode.
D The ScanSnap internal lamp switches off in sleep mode.
With some computers, the initialization of the ScanSnap may be performed several
times when the computer is started up.
z Close the ADF paper chute (cover) after storing the extension away.
z It may take two to three minutes until the light of the [Scan] button goes out after the
computer is turned off.