Filter
Top Products
Replacing the Pick Roller
294
5. Rotate the bushing (left).
6. Remove the pick roller shaft.
Slightly pull up the left part of the pick roller shaft (about 5 mm), move it towards the left
side, and then pull it up to remove it from the ScanSnap.
The area around the pick roller may get dirty due to paper dust, and cause scan errors.
Remove the dirt using a dry cloth moistened with Cleaner F1 in order to prevent such
errors.
Do not use any water, mild detergent or air spray.
Pick roller shaft
Bushing
Pick roller
Pick roller
Pick roller shaft