Filter
Top Products
Removing Assemblies 6-27
Tray 1 Pickup Roller
Figure 6-24 Removing the Pickup Roller (shown with Envelope Entrance Cover
removed)
1 Open Tray 1. The Tray 1 Pickup Roller is in the center of the
Tray 1 Pickup Assembly.
2 Grasp the Envelope Entrance Cover and pull it straight away from
the printer.
3 Pry open the blue latch on the roller.
4 Lift the roller out.
Hint To replace the roller, make sure the pin in the roller lines up with the
hole in the shaft.