Filter
Top Products
7-40 Troubleshooting
68 NVRAM ERROR
CHECK SETTINGS
An error occurred in the
printer’s nonvolatile
memory (NVRAM) and
one or more printer
settings has been reset to
its factory default.
1. Print a Configuration
Page and check the
printer settings to
determine which values
have changed.
2. Hold down [Cancel
Job] while turning the
printer on. This will clean
up the NVRAM by
removing old areas that
are not being used.
68 NVRAM FULL
CHECK SETTINGS
An error occurred in the
printer’s nonvolatile
memory (NVRAM) and
one or more printer
settings has been reset to
its factory default.
1. Print a Configuration
Page and check the
printer settings to
determine which values
have changed.
2. Hold down [Cancel
Job] while turning the
printer on. This will clean
up the NVRAM by
removing old areas that
are not being used.
69.X
PRINTER ERROR
A temporary printing error
occurred.
X Description:
0 = The Duplex
mechanism has failed
1. Turn the printer off, and
then turn the printer on.
2. Reseat the Duplexer.
Table 7-6. Numerical Printer Messages (continued)
Control Panel
Message
Event Log
Message
Explanation Recommended
Action