Filter
Top Products
Control Panel Menus 3-9
Paper Handling Menu
When paper handling settings are correctly configured through the
Control Panel, you can print by choosing the type and size of paper
from the printer driver or software application.
Some items in this menu (such as duplex and manual feed) can be
accessed from a software application, or from the printer driver (if the
appropriate driver is installed). Printer driver and software application
settings override Control Panel settings.
Table 3-7. Paper Handling Menu
Item Values Explanation
ENVELOPE FEEDER
SIZE=COM10
For supported paper sizes
see page 1-12.
This item appears only when the
optional envelope feeder is installed.
Set the value to correspond with the
envelope size currently loaded in the
envelope feeder.
ENVELOPE FEEDER
TYPE=PLAIN
For supported paper types
see page 1-12.
This item appears only when the
optional envelope feeder is installed.
Set the value to correspond with the
envelope type currently loaded in the
envelope feeder.
TRAY 1 MODE=
FIRST
FIRST
CASSETTE
Determine how the printer will use
Tray 1.
FIRST
: If paper is loaded in Tray 1,
the printer will pull paper from that
tray first.
CASSETTE
: A paper size must be
assigned to Tray 1 using the
TRAY 1 SIZE
option (the next item
in this menu when
TRAY 1
MODE=CASSETTE
). This allows Tray 1
to be used as a reserved tray.
TRAY 1 SIZE=
LETTER
For supported paper sizes
see page 1-12.
This item appears only when
TRAY 1
MODE=
CASSETTE
. Set the value to
correspond with the paper size
currently loaded in Tray 1.