Filter
Top Products
7-62 Troubleshooting
Table 7-15. Curl
Possible Cause Action
Paper does not meet
printer specifications
or is stored
improperly.
1. Print a few more pages to see if the problem
corrects itself.
2. Turn over the stack of paper in the tray. Also try
rotating the paper 180°.
3. Check the paper (or other print media) type and
quality. Replace the paper, and advise the customer
to use the recommended paper and store it properly.
Printer’s operating
environment does not
meet specifications.
Make sure the printer’s operating environment meets
specifications.
Wrong output bin. Print to a different output bin (top or Rear Output
Bin).
Wrong Fuser setting
for paper type.
From the Paper Handling Menu on the Control
Panel, change the Fuser mode setting or choose
another paper type from the printer driver.
See also “Dropouts” on page 7-65.