Filter
Top Products
7-20 Troubleshooting
DISK IS
WRITE PROTECTED
The EIO disk is protected,
and no new files can be
written to it.
Disable the write
protection through
HP JetAdmin.
EIO n DISK
INITIALIZING
The disk accessory card
takes a long time to
initialize. The first
parameter is the
accessory slot number for
this disk accessory card.
EIO n DISK
NOT FUNCTIONAL
The EIO disk is not
working correctly.
Remove the EIO disk from
the slot indicated.
Replace it with a new EIO
disk.
EIO n
INITIALIZING
alternates with
DO NOT POWER OFF
Wait for the message to
disappear (approximately
5 minutes). If the printer
EIO card is operating
correctly and
communicating with the
network, this message
disappears after
approximately one minute
and no action is required.
If the EIO card is unable to
communicate with the
network, this message
remains for five minutes
and then disappears. In
this case the printer is not
communicating with the
network (even though the
message is no longer
present). The problem may
be a bad EIO card, a bad
cable or connection on the
network, or a network
problem. Contact your
network administrator.
EIO n DISK
SPINNING UP
The disk accessory is
initializing. The first
parameter is the
accessory slot number for
this accessory card.
Table 7-5. Alphabetical Printer Messages (continued)
Control Panel
Message
Event Log
Message
Explanation Recommended
Action