Filter
Top Products
7-24 Troubleshooting
MEMORY SETTINGS
CHANGED
The printer changed its
memory settings because
it did not have enough
memory to use the
previous settings for I/O
Buffering and Resource
Saving. This usually
occurs after removing
memory from the printer,
adding a Duplexer, or
adding a printer language.
You might want to change
memory settings for I/O
Buffering and Resource
Saving (although default
settings are usually best)
or add more memory to
the printer.
MEMORY SHORTAGE
JOB CLEARED
The printer did not have
enough free memory to
print the entire job. The
remainder of the job will
not print and will be
cleared from memory.
1. Press [Go] to continue.
2. Change the Resource
Saving setting from the
printer’s Control Panel or
add more memory to the
printer.
MEMORY SHORTAGE
PAGE SIMPLIFIED
The printer had to
compress the job in order
to fit it in available
memory. Some data loss
might have occurred.
Press [Go] to continue.
The customer might want
to add more memory to
the printer.
OFFLINE
The printer is offline. Press [Go] to place the
printer online.
PERFORM PRINTER
MAINTENANCE
To ensure optimum print
quality, the printer
prompts the customer to
have routine
maintenance performed
every 200,000 pages.
Install the Printer
Maintenance Kit. You
must reset the
maintenance page count
after performing
maintenance by pressing
[Item-] and [Value-] while
turning the printer on.
Table 7-5. Alphabetical Printer Messages (continued)
Control Panel
Message
Event Log
Message
Explanation Recommended
Action