Filter
Top Products
3-4 Printer Operation
Settings and Defaults
The printer makes most printing decisions based on either temporary
settings or permanent defaults.
Note Settings sent from software applications override printer defaults.
Setting the display language
1 Press and hold [Select] while turning on the printer. Hold
[Select] until
SELECT LANGUAGE
appears.
2 Release [Select].
INITIALIZING
appears briefly. Wait for
LANGUAGE=ENGLISH
to appear.
3 Press [– Value +] repeatedly until the desired language appears.
4 Press [Select] to save your choice. An asterisk (*) will appear
beside the selected language.
5 Press [Go] to exit the menu.
Table 3-3. Settings and Defaults
Setting or Default Explanation
Temporary Setting A value set for the current print job by the software application. For
example, a request from the software to print three copies instead
of the Control Panel default value of one copy is a temporary
setting. The printer continues to use the temporary setting until it
receives another software request or until it is reset.
Control Panel Default A value set at the Control Panel when you select a menu item. An
asterisk appears, indicating the default setting. The printer retains
this default when it is turned off.
Factory Default The value set for each menu item at the factory. Factory defaults
are listed in the item column in the menu tables starting on
page 3-8.