Filter
Top Products
Control Panel Menus 3-21
RESOURCE SAVE=
OFF
OFF
ON
AUTO
Dedicate printer memory to save each
language’s permanent resources. (You
might need to add memory to the printer in
order for this item to appear.) The amount of
memory set aside can be different for each
installed language. Some languages might
have memory set aside for resource saving
without requiring all languages to do so. Any
time the amount of memory dedicated to a
specific language is changed, all languages
will lose all saved resources, including any
unprocessed print jobs.
OFF
: No language resource saving is
performed, and language-dependent
resources, such as fonts and macros, are
lost when language or resolution changes.
ON
: An item will appear for each installed
language that allows the user to allocate a
particular amount of memory to that
language’s resource saving area. (See the
items below.)
AUTO
: The printer automatically determines
the amount of memory to use for each
installed language’s resource saving area.
PCL MEMORY=
400K
0K
and up
(This value depends on
the amount of installed
memory.)
This item appears only when
RESOURCE
SAVE=ON
. Select the amount of memory
used for saving PCL resources. Printer
default is the minimum amount of memory
needed to perform resource saving for PCL.
Press [– Value +] to change settings by
increments of 10 (up to 100 KB) or by
increments of 100 (above 100 KB).
PS MEMORY=
400K
0K
and up
(This value depends on
the amount of installed
memory.)
This item appears only when
RESOURCE
SAVE=ON
. Select the amount of memory
used for saving PS resources. Printer
default is the minimum amount of memory
needed to perform resource saving for PS.
Press [– Value +] to change settings by
increments of 10 (up to 100 KB) or by
increments of 100 (above 100 KB).
Table 3-10. Configuration Menu (continued)
Item Values Explanation