Filter
Top Products
3-10 Printer Operation
TRAY 1 TYPE=
PLAIN
For supported paper types
see page 1-12.
This item appears only when
TRAY 1
MODE=
CASSETTE
. Set the value to
correspond with the paper type
currently loaded in Tray 1.
TRAY 2 TYPE=
PLAIN
For supported paper types
see page 1-12.
Set the value to correspond with the
paper type currently loaded in Tray 2.
TRAY 3 TYPE=
PLAIN
For supported paper types
see page 1-12.
This item appears only when a third
paper tray is installed. Set the value
to correspond with the paper type
currently loaded in Tray 3.
TRAY 4 TYPE=
PLAIN
For supported paper types
see page 1-12.
This item appears only when a fourth
paper tray is installed (available only
on the HP LaserJet 4000 T/4000 TN
and 4050 T/4050 TN printers). Set
the value to correspond with the
paper type currently loaded in Tray 4.
MANUAL FEED=OFF OFF
ON
Feed the paper manually from Tray 1,
rather than automatically from a tray.
When
MANUAL FEED=ON
and Tray 1
is empty, the printer goes offline when
it receives a print job and displays
MANUALLY FEED
[PAPER SIZE]
.
DUPLEX=OFF OFF
ON
This item appears only when an
optional duplexer is installed. Set the
value to
ON
to print on both sides
(duplex) or
OFF
to print on one side
(simplex) of a sheet of paper.
BINDING=
LONG EDGE
LONG EDGE
SHORT EDGE
This item appears only when an
optional duplexer is installed and the
duplex option is on. Choose the
binding edge when duplexing
(printing on both sides of paper).
Table 3-7. Paper Handling Menu (continued)
Item Values Explanation