Filter
Top Products
Troubleshooting the Printing System 7-19
CHOSEN LANGUAGE
NOT AVAILABLE
A print job requested a
printer language that does
not exist in the printer. The
job will not print and will
be cleared from memory.
1. Print the job using a
driver for a different printer
language, or add the
requested language to the
printer (if available).
2. Press [Go]
to continue.
CLOSE TOP COVER
This message may persist
when the Top Cover is
closed because of a
damaged or improperly
connected switch.
1. Check SW101
(Figure 7-33 on
page 7-108) for proper
operation. Make sure
wires are connected.
2. Replace SW101.
3. If the new switch does
not solve the error, the
wiring or the Engine
Controller Board may be
defective.
DISK DEVICE
FAILURE
The EIO disk had a critical
failure and can no longer
be used.
Reseat the EIO disk or
replace it with a new one.
DISK FILE
OPERATION FAILED
The requested operation
could not be performed.
You might have
attempted an illegal
operation, such as trying
to download a file to a
non-existent directory.
1. Check the file name
and directory name.
2. Reattempt the
operation.
DISK FILE
SYSTEM IS FULL
The disk is full. 1. Delete files from the
EIO disk and then try
again, or add a flash
DIMM.
2. Download or delete
files from HP JetAdmin,
and download or delete
fonts from HP FontSmart.
(See the software help for
more information.)
Table 7-5. Alphabetical Printer Messages (continued)
Control Panel
Message
Event Log
Message
Explanation Recommended
Action