Filter
Top Products
Control Panel Menus 3-23
TONER
LOW=CONTINUE
CONTINUE
STOP
Determine how the printer behaves when
Toner is low. The
TONER LOW
message will
first appear when the Toner Cartridge is
almost out of Toner. (About 100 to 300
sheets can still be printed.)
CONTINUE
: The printer will continue to print
while the
TONER LOW
message is
displayed.
STOP
: The printer will go offline and wait for
further action.
RAM DISK=OFF OFF
ON
AUTO
Determine how the RAM disk is configured.
This item appears only if there is no optional
hard disk installed and the printer has at
least 8 MB of memory.
OFF
: The RAM disk is disabled.
ON
: The RAM disk is enabled. Configure the
amount of memory to be used through the
following item:
RAM DISK SIZE
.
Note
If the setting is changed from
OFF
to
ON
or
from
OFF
to
AUTO
, the printer will
automatically reinitialize when it becomes
idle.
RAM DISK
SIZE=XXXK
0K
and up
(This value depends on
the amount of installed
memory.)
Determine the size of the RAM disk. This
item appears if
RAM DISK
=
ON
or
AUTO
.
Press [– Value +] to change settings by
increments of 100.
Note
This setting cannot be changed if
RAM
DISK=AUTO
. Changing this value will cause
the printer to reinitialize when it becomes
idle.
Table 3-10. Configuration Menu (continued)
Item Values Explanation