Filter
Top Products
6-34 Removing and Replacing Parts
Registration Assembly
Figure 6-31 Removing the Registration Assembly
1 Remove the following covers (starting on page 6-6): Top Cover,
Left Side Cover, Front Right Side Cover, and Tray 1. Remove the
Tray 1 pickup assembly (page 6-29). The Right Side Toner
Cartridge Guide can be lifted without removal (page 6-33). The
Registration Assembly is under the Toner Cartridge.
2 Remove the 3 black self-tapping screws shown. (Lift the green
handle on the right end of the Registration Assembly to access
the black screw on the left rear side.)