Filter
Top Products
7-16
*1: The meaning of auxiliary setting 1 for special segment is shown below.
–2: Two segments before the final segment 1: First segment
–1: One segment before the final segment 2: Second segment
0: Final segment
*2: When auxiliary setting 1 of RAMP-E time monitoring is set to 0.0 sec, event output is off.
*3: Auxiliary setting 1 and auxiliary setting 2 of segment time and program time that determine display
unit and range of segment are set by setup data C62 settings as follows.
When C62 is set to 0: 0 hours 00 min to 500 hours 00 min
When C62 is set to 1: 0 min 00 sec to 500 min 00 sec
When C62 is set to 2: 0.0 sec to 3000.0 sec
Chapter 7. PARAMETER SETUP