Filter
Top Products
7
DCP552 Parameter Work Sheet
Event Meaning Setting Operation Auxiliary settings
type category category
24 to 63
Event off ----- ----- Auxiliary 1 : None Auxiliary 2 : None
64
Normal PV1 upper limit operation
Measuring instrument
PV Auxiliary 1 : Hysteresis Auxiliary 2 : Operating point
65
Normal PV1 lower limit operation
66
Normal PV2 upper limit operation
67
Normal PV2 lower limit operation
68 PV upper limit
69 PV lower limit
70 Deviation upper limit
71 Deviation lower limit
72
Deviation upper limit with standby
73
Deviation lower limit with standby
74
Absolute value deviation upper limit
75
Absolute value deviation lower limit
76
Absolute value deviation upper limit with standby
77
Absolute value deviation lower limit with standby
78 PV deviation rate upper limit
Measuring instrument
PV Auxiliary 1 : Sampling cycle Auxiliary 2 : Operating point
79 PV deviation rate lower limit
80 SP upper limit
Measuring instrument
PV Auxiliary 1 : Hysteresis Auxiliary 2 : Operating point
81 SP lower limit
82 MV upper limit
83 MV lower limit
84
SOAK absolute value deviation upper limit
85
SOAK absolute value deviation lower limit
86
SOAK absolute value deviation upper limit with standby
87
SOAK absolute value deviation lower limit with standby
88 Program No. binary code
Measuring instrument
Code Auxiliary 1: No. of output Auxiliary 2 : None
89 Segment No. binary code
90 Program No. BCD code
91 Segment No. BCD code
92 Specified segment
Measuring instrument
Mode Auxiliary 1 :
Segment specification
Auxiliary 2 : None
93 RAMP-E monitoring time
Measuring instrument
Time Auxiliary 1 : Operating point Auxiliary 2 : None
94 Segment time
Measuring instrument
Time Auxiliary 1 : On-time Auxiliary 2 : OFF-time
95 Program time
96 to 127
Event off ----- ----- Auxiliary 1 : None Auxiliary 2 : None
128 RUN, HOLD, END, FAST
Measuring instrument
Mode Auxiliary 1 : Depends on channel conditions
129 HOLD Auxiliary 2 : None
130 READY, READY FAST
131 END
132 G.SOAK wait
133 MANUAL
134 AT executing
135 FAST, READY FAST
136 Console setting operation
Measuring instrument
Mode Auxiliary 1 : None Auxiliary 2 : None
137 RUN
Measuring instrument
Mode Auxiliary 1 : Depends on channel conditions
138 Advance Auxiliary 2 : None
139 All alarms (logical OR)
Measuring instrument
Mode Auxiliary 1 : None Auxiliary 2 : None
140 PV range alarm
141 Instrument alarm
142 O
2 sensor error